11 beste Stellen als engineer power system in wien – aktuell auf Personalsuche

Lead PCB Design Engineer
EMTensor GmbH —Wien, W
6 Tage
Electrical Engineer
Mercury Engineering —Wien, W
Commissioning Manager
Mercury Engineering —Wien, W
Electrical Package Manager
Mercury Engineering —Wien, W
(Senior) Software Engineer – Java Fullstack & Mendix Low-Code
adesso Austria GmbH —Wien, W
Sales Engineer Projektgeschäft, Schwerpunkt Notbeleuchtung (m/w/d)
Eaton —Wien, W
Analytics Solution Architect (w/m/x) – Austria
Avanade —Wien, W
Electrical Project Manager
Mercury Engineering —Wien, W
Mechanical Package Manager
Mercury Engineering —Wien, W
Mechanical Project Manager
Mercury Engineering —Wien, W
Product Engineer II - Indoor Positioning Systems
Esri —Wien, W
- Master
- Bachelor

More jobs to discover

Find similar jobs that you might be interested in.

Electrical Engineer
Scientific Research Corporation —Wien, W
Performing technical inspections of the electrical elements of the project. The Engineer is responsible for performing technical inspections of electrical work,…
Technical Support Engineer
BYD Europe —Wien, W
Sound understanding of PV strings, MPPT, three-phase systems, grid-connected/off-grid operation, time-of-use operation and electrical safety.
14 Tage

Ich möchte aktuelle Job-E-Mails für Stellen als engineer power system in wien erhalten

Wenn Sie sich bei Ihrem Konto anmelden, stimmen Sie den Nutzungsbedingungen, den Richtlinien zur Verwendung von Cookies sowie der Datenschutzerklärung von SimplyHired zu.

Weitere Job-Standorte erkunden

engineer power system jobs near wien

Jobs als Ingenieur in Wien, W

Jobs als Manager in Wien, W

Jobs als Innenarchitekt, Architekt, Zeichner, Designer in Kärnten

Jobs als Architekt in Mödling, NÖ

Jobs als Innenarchitekt, Architekt, Zeichner in Graz, ST

Jobs als Civil Engineer in Oberösterreich

Jobs als Automation Engineer in Wien

Jobs als Senior Project Manager in Wien, W

Jobs als Ingenieur Mechatronik in Wien

Jobs als Ingenieur Elektrotechnik in Linz, OÖ

Jobs als Ingenieur Maschinenbau in Vorarlberg

Jobs als Pharma Ingenieur in Wien, W

Jobs als Ingenieur in Braunau Am Inn, OÖ

Jobs als Ingenieur Maschinenbau in Wien

Jobs als Java Developer in Graz, ST

Jobs als Softwareentwickler Java in 1210 Floridsdorf

Jobs als Softwareentwickler in Graz, ST

Jobs als Java in Wien

Jobs als Java Entwickler in Innsbruck, T

Jobs als Electronics Engineer in Graz, ST

Lead PCB Design Engineer

EMTensor GmbH
Wien, W

Jetzt bewerben

Details zur Stelle

vor 6 Tagen

Vollständige Stellenbeschreibung

About EMTensor

EMTensor develops electromagnetic (microwave) tomography systems for brain imaging — scanners that detect and monitor stroke at the bedside and in the ambulance. We are headquartered in Vienna, Austria, with an engineering office in Bengaluru, India. The team is small, so the engineer who designs something owns it end to end.

The Role

You own PCB layout for our instrument hardware: an eight-layer mixed-signal board carrying an analogue front end, an RF chain around 1 GHz and a data-conversion stage. You take the board from placement to a released fabrication package, and you stay with it through the first build.

You work directly with the schematic engineer, the FPGA engineer and the system architect. There is no layer of project management between you and the design decisions.

What You Will Work On

Placement, stack-up and material selection to meet impedance targets on an eight-layer board.
RF routing: impedance-controlled traces, matching networks, ground pours and return paths, shielding, connector transitions.
High-speed routing: differential pairs, length and topology matching, reference continuity, EMC.
A demanding drill specification — 1,060 holes of Ø0.15 mm through 1.61 mm, an aspect ratio of 10.7:1. You will discuss this with the fabricator and decide what is buildable.
Gerbers, drill data, DFM and DFA checks, answering fabricator queries, first-article acceptance.
Feeding layout constraints back into the schematic — telling us early when a part choice will not route.

What We Are Looking For

Eight or more years of board-level PCB layout.
Real RF layout experience — boards where the RF section was yours. This is the requirement we will not compromise on. Antenna ports, RF traces, matching, shielding: we will ask you what you routed and how you verified it.
Altium Designer. If your main tool has been Allegro, Xpedition, PADS or OrCAD, tell us — we will ask how quickly you can switch, and a good answer is enough.
Stack-up, controlled impedance, microstrip and coplanar waveguide, differential pairs, via strategy.
Fluency with the manufacturing package: Gerbers, drill files, DFM, and working with fabricators and assemblers.

Nice to Have

Signal- and power-integrity simulation (HyperLynx or equivalent), IR-drop analysis.
IPC-CID or CID+ certification.
A background in radar, instrumentation, scientific equipment, defence, space or wireless products.
Experience mentoring or leading other layout engineers.

A Note on Scope

This is board-level PCB layout. It is not IC, analogue or mask layout — if your work has been inside the chip rather than on the board, this is not the right role. Schematic design is handled by a separate engineer on the same team; we are hiring for that position in parallel.

How to Apply

Send your CV to [email protected]. Please put the role title in the subject line.

We read every application ourselves and reply to each one. If your CV lists tools without projects, add a few lines about one board you worked on — that is what we look at first.

Jetzt bewerben

Erweiterte Suche

engineer power system Jobs in wien

Lead PCB Design Engineer

Electrical Engineer

Commissioning Manager

Electrical Package Manager

(Senior) Software Engineer – Java Fullstack & Mendix Low-Code

Sales Engineer Projektgeschäft, Schwerpunkt Notbeleuchtung (m/w/d)

Analytics Solution Architect (w/m/x) – Austria

Electrical Project Manager

Mechanical Package Manager

Mechanical Project Manager

Product Engineer II - Indoor Positioning Systems